TT Coupe L4-1.8L Turbo (AWP) (2005)
Oil Pan: Service and Repair
Oil pan, removing and installing
Special tools, testers and auxiliary items required
^
Electric drill with plastic brush attachment
^
Silicone sealant D 176 404 A2
Removing
-
Remove center sound insulation panel (arrows).
-
Drain engine oil.
-
Remove bracket -2- for oil return line.
-
Remove oil return line from oil pan.
-
Remove oil pan.
Note:
Use special tool 3185 to loosen and tighten oil pan screws. Remove using 3249 hex ball socket.
-
Remove oil pan (if necessary, loosen pan by lightly tapping with rubber mallet).
-
Remove sealant remaining on cylinder block with flat scraper.
-
Remove remaining sealant from oil pan (with rotating plastic brush or similar).
WARNING!
Wear eye protection.
-
Clean sealing surfaces: they must be free of oil and grease.
Installing