TT Coupe L4-1.8L Turbo (AWP) (2005)
Expansion Valve: Service and Repair
Refrigerant Pipes on Expansion Valve, Removing and Installing
Refrigerant Pipes On Expansion Valve, Removing And Installing
-
Discharge refrigerant system
NOTE: Depending on engine version, improved access may be obtained by removing front suspension cross brace.
-
Remove insulation -A-.
-
Remove screw -B-, tightening torque 8 Nm (71 in lb).
-
Remove refrigerant pipes -C- and -D-.
NOTE:
-
Always replace both O-rings -E- (17.0 mm; 1.85 mm) and -F- (8.2 mm; 1.85 mm).
-
Seal off open ends of refrigerant pipes and the connections on expansion valve.
-
Install refrigerant pipes stress free.