audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Fuel Level Sensor -G-, Checking|Page 8027 > < Fuel Level Sensor -G-, Checking|Page 8025
Page 3
background image

-

For measured value 0 Ohm there is a short circuit

-

For measured value infinity Ohms there is an open circuit.

NOTE:  To check resistance values "tank full" or "tank empty", Fuel Pump (FP) must be removed and the sensor float must be placed in the upper or
lower end position.

With fuel level sensor removed, the following values will result due to the longer reach of the float arm:

Fuel Level Sensor -G-, Checking|Page 8027 > < Fuel Level Sensor -G-, Checking|Page 8025