audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Throttle Valve Control Module -J338-, Testing|Page 2890 > < Throttle Valve Control Module -J338-, Testing|Page 2888
Page 1
background image

Electronic Throttle Control Module: Component Tests and General Diagnostics
Throttle Valve, Checking For Soiling

Throttle Valve, Checking For Soiling

Requirements

-

An original equipment air filter must be installed and it must be OK.

-

Intake air guide OK.

-

Fuel pressure OK.

-

Tank ventilation OK.

-

Fuel injectors OK.

-

Coolant temperature > 80 degrees C.

-

Oxygen sensor adaptation values and control OK.

Checking oxygen sensor adaptation values and control

Work sequence

-

Connect VAS5051 tester, See: Testing and Inspection/Scan Tool Testing and Procedures/Vehicle Diagnostic, Testing and Information System
VAS 5051, Connecting and Selecting Functions  and select vehicle system "01 - Engine electronics". Engine must run at idle during this.

Display on VAS5051:

-

In selection -1-, click on the diagnostic function "04 - Basic Setting".

Display on VAS5051:

1

-

Enter display group

Max. input value = 255

-

Select function "032" in button field -2- for "display group number 032" and press Q button to confirm input.

Throttle Valve Control Module -J338-, Testing|Page 2890 > < Throttle Valve Control Module -J338-, Testing|Page 2888