audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Canister Purge Solenoid > < Canister Purge Control Valve|Testing and Inspection|Page 3284
Page 4
background image

If the LED lamp does not flash or lights up continuously:

-

Connect test box VAG 1598/31 to wiring harness for engine control module. Do not connect to the engine control module itself.  

-

Test for open circuit and short to positive or Ground in the following wiring connections:

Connector Contact

Test box VAG 1598/31 Socket

2

64

-

Correct short circuit or open circuit if necessary.

If the wiring is OK:

-

Install a new engine control module

Canister Purge Solenoid > < Canister Purge Control Valve|Testing and Inspection|Page 3284