TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-1124003.png)
Perform installation of injectors in reverse order. When doing this note the following:
-
Replace O-rings on all injectors and lightly moisten with clean engine oil.
-
Insert fuel injectors into fuel rail perpendicular and in correct position, and secure them with retaining clips.
-
Position fuel rail with secured fuel injectors on intake manifold and apply uniform pressure to press it in.
-
Erase DTC memory of ECM. See: Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Diagnostic Mode
04 - Erase DTC Memory
-
Generate readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness
Codes/Generate Readiness Code
