audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Engine Coolant Temperature (ECT) Sensor -G62-, Testing|Page 2545 > < Engine Coolant Temperature (ECT) Sensor -G62-, Testing|Page 2543
Page 3
background image

Examples:

-

30 degrees C corresponds to a resistance from 1500 to 2000 Ohms

-

80 degrees C corresponds to a resistance from 275 to 375 Ohms

If the specification is not attained:

-

Fit a new engine coolant temperature sensor.

If the specification is obtained:

-

Connect test box VAG 1598/31 to wiring harness for engine control module. Do not connect to the engine control module itself.  

-

Test for open circuit and short to positive or Ground in the following wiring connections:

Connector Contact

Test box VAG 1598/31 Socket

3 (signal)

93

54

108

-

Test for short circuits between the two wires.

-

Correct any open/short circuit as necessary.

If no fault is detected:

-

Fit a new engine control module.

Engine Coolant Temperature (ECT) Sensor -G62-, Testing|Page 2545 > < Engine Coolant Temperature (ECT) Sensor -G62-, Testing|Page 2543