TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-2333002.png)
3
-
Screws (4x)
-
Tightening torque 12 Nm
-
Must be replaced if airbag has triggered
4
-
Support
-
Must be replaced if airbag has triggered
-
Remove airbag unit.
-
Remove screws - 2 - (4x).
5
-
Connector
Disconnecting airbag connector
-
Use screwdriver to lift connector - 1 - for front passenger side airbag over retainer tab - 2 - and pull off connector in direction of arrow - 3 -.
NOTE:
-
After connecting the battery, check vehicle equipment (radio, clock, electric windows)
-
If the Airbag Malfunction Indicator Lamp (MIL) K75 signals a malfunction after assembling, then DTC memory must be erased and checked
again using vehicle diagnostic, testing and information system VAS 5051 A scan tool.
