TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-194001.png)
Wheel Speed Sensor: Removal and Replacement
Rear Axle Components
ABS Wheel Speed Sensor, Removing and Installing
Removing
-
Release connector -1- on wheel speed sensor and disconnect wiring.
-
Remove bolt -2-.
-
Pull speed sensor out of stub shaft.
Installing
Install in reverse sequence; note the following points:
-
Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with solid lubricant paste G 000 650.
Tightening Specification
