TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-306001.png)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor -G-, Removing And Installing
Removing
Observe safety precautions.
Observe rules for cleanliness.
-
Remove fuel pump.
-
Disengage connector prongs of electrical wires -3- and -4- and disconnect.
-
Pry off retaining straps -1- and -2- using screwdriver and remove fuel level sensor toward bottom (arrow).
Installing
Installation is the reverse of removal, noting the following:
-
Insert fuel level sensor into guides at Fuel Pump (FP) and press up until engagement.
-
Insert connector prongs of electrical wires and check for proper engagement.
-
Install Fuel Pump (FP).
-
Observe notes for connection of battery.
