audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Battery, Charging|Page 5529 > < Battery, Charging|Page 5527
Page 1
background image

Battery: Procedures
Quick Charging/Boost Starting

Quick Charging/Boost Starting

WARNING:

-

Audi TT equipped with the 3.2L V6 engine are equipped with an Absorbed Glass Mat (AGM) battery that must not be quick charged
under any circumstances

-

Observe Warning and safety measures for lead acid batteries.

-

Always wear suitable protective clothing.

-

Conventional batteries should only be quick charged when absolutely necessary (to aid in starting), and the charge current must not
exceed 20% of battery capacity (refer to charger instructions).

-

Battery must not be connected to vehicle electrical system when quick charging. Disconnect negative ( - ) and positive ( B+ ) battery
terminals.

-

The battery cell caps must always be firmly screwed on for charging, voltage measurement and load measurement.

-

Ensure good ventilation.

-

Avoid naked flames and never smoke in rooms used for charging batteries as the battery forms gas which is readily flammable during the
charging process.

-

Observe safety regulations of charger and battery manufacturers.

-

Never "quick charge" a totally discharged battery. Effective charging will not take place.

Battery, Charging|Page 5529 > < Battery, Charging|Page 5527