TT Coupe L4-1.8L Turbo (AWP) (2005)
/Page-2189002.png)
-
With vehicle standing on its wheels, remove bolts - 1 -. If necessary, lift vehicle until bolts are accessible.
-
Raise vehicle to working height, thus relieving tension off coil spring.
-
Remove spring.
Installing spring
-
Check whether lower spring plate (zinc) is damaged.
-
Replace if necessary.
-
Install spring together with upper spring plate.
Note installation position.
End of spring - arrow - must lie against stop on spring plate.
-
Use transmission jack V.A.G 1359/2- to press rear axle upward.
