TT Coupe L4-1.8L Turbo (AWP) (2005)
-
Compress coil spring with Spring compressor V.A.G 1752/1- until the upper spring plate is free.
-
Remove hex nut from piston rod.
-
Remove individual parts of suspension strut and coil spring with Spring compressor V.A.G 1752/1-.
1 -
Commercially available ratchet handle
2 -
T10001/8
3 -
T10001/11
4 -
T10001/5
5 -
Spring compressor V.A.G 1752/1
6 -
2 spring holders (80 - 165 mm) V.A.G 1752/4
Special tool - 3186 - can also be used as an alternative for the tools shown above.
-
Make sure that coil spring is seated correctly in adapter V.A.G 1752/4 - arrow -.
Installing
-
Put coil spring with spring compressor V.A.G 1752/1 onto bottom spring plate.
The end of the coil spring must make contact with the stop - arrow -.