TT Coupe L4-1.8L Turbo (AWP) (2005)
Specification: Infinity Ohms
If no fault is detected in the wiring:
-
Replace the respective Automatic Transmission Hydraulic Pressure Sensor.
-
Erase DTC memory of TCM. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and
Procedures/Diagnostic Mode 04 - Erase DTC Memory
-
Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles
and Readiness Codes/Generate Readiness Code