TT Coupe L4-1.8L Turbo (AWP) (2005)
Shift Interlock Cable: Adjustments
6 Spd. A/T 09G
Locking Cable, Adjusting
CAUTION: Locking cable must be adjusted exactly according to the following description.
Adjustment requirements:
-
Locking cable in installation position
-
Rear center console removed.
-
Selector lever in "P" position.
-
Ignition key in removal position.
Adjusting Procedure:
-
Steering column is in rear/lower position.
-
Loosen screw on bracket.
-
Insert adjusting gauge 3352 A between locking lever -1 - and locking cable eye - 2 -.
-
For play compensation, pull bracket in direction of arrow until stop.
-
It must be easy to guide adjusting gauge 3352 A into and out of this position.
-
Tighten screws on bracket (10 Nm).
-
Remove adjusting gauge.
-
Ignition key removal lock, checking function.