TT Coupe L4-1.8L Turbo (AWP) (2005)
Clutch Pedal Position Sensor / Switch: Testing and Inspection
Clutch Vacuum Vent Valve Switch -F36-, Testing
Special tools and equipment
-
VAG 1526 A
-
VAG1527 B
-
VAG 1594 A
-
VAG 1598/31
-
VAS 5051 with VAS 5051/1
NOTE: This signal is used to avoid over-revving and load change jolts when disengaging the clutch. It is also needed for the cruise control
system.
Test sequence
-
Connect the vehicle diagnostic, testing and information system VAS 5051, See: Powertrain Management/Computers and Control Systems/Testing
and Inspection/Scan Tool Testing and Procedures/Vehicle Diagnostic, Testing and Information System VAS 5051, Connecting and Selecting
Functions and select the vehicle system "01 - Engine electronics" from the menu. When doing this the ignition should be switched on.
Display on VAS 5051: