audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Transmission Mount:|341002|Page 4341 > < All Technical Service Bulletins for Transmission Mount:|341002|Page 4339
Page 1
background image

Transmission Mount: All Technical Service Bulletins
M/T - Direct Shift Gearbox Clacking Noise

34 07 05 

July 10, 2007 

2015095/2

Supersedes Technical Service Bulletin Group 34 number 07-04 dated May 21, 2007 due to addition of 2008 TT.

Models

Transmission makes clacking noise at load change

Condition

Load change noises (clacking) on all A3 and TT models with DSG gearbox. Clacking noises at load change from the area of the swivel support.

Technical Background

Loose attachment on the swivel support. Engine vibrations lead to this clacking noise.

Production Solution 

In preparation.

Service

Contrary to the Repair Manual, use the following bolts for fitting the swivel support:

M 10x35 (N 910 661 01) as well as M 10x75 (N 106 802 01).

Tightening torque: 50 Nm + 90°.

All Technical Service Bulletins for Transmission Mount:|341002|Page 4341 > < All Technical Service Bulletins for Transmission Mount:|341002|Page 4339