TT Coupe L4-2.0L Turbo (BPY) (2008)
Hood Shock / Support: Removal and Replacement
Hood Gas-Filled Strut
Hood Gas-Filled Strut
Removing
-
Support hood or secure it from falling down.
-
Raise securing spring slightly using a small screwdriver and remove gas-filled strut - 1 - from upper ball stud - 2 -.
-
Repeat procedure on lower ball stud.
Installing
‹› After completely removing gas-filled strut, ensure correct position when installing: gas-filled strut tube must be engaged on hood side.
-
Press gas-filled strut onto ball stud and engage.