TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-2403004.png)
-
Remove Ground (GND) cable from left long member.
-
Remove left and right connecting bolt for front part of long member.
-
Tighten adapter (T40092/3-2) (left) and ( T40093/3-3) (right) on long members with bolts removed earlier - arrow -.
‹› The illustration shows the left side of the vehicle.
-
Place Square Pipes (T40091/1) with Connector (T40093/4) in Connector ( T40091/3) and Supports (T40093/3) as shown in the illustration.
-
Slide support (T40091/2) into both connectors (T40093/4) with slide (T40093/5).
