TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-2439002.png)
NOTE:
-
Ensure that electrical connections are pushed in as far as stop and engage with a click.
-
Ensure wires are not pinched.
-
Switch on ignition.
CAUTION: Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired
correctly, they may deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the
battery.
-
Connect battery ground wire with ignition switched on.
-
If Airbag Malfunction Indicator Lamp (MIL) K75 indicates a fault after installation, DTC memory must be checked, deleted and checked again
Vehicle Diagnosis, Testing and Information System VAS 5051 B.
