TT Coupe L4-2.0L Turbo (BPY) (2008)
Convertible Top Pump: Removal and Replacement
Oil Reservoir
Oil Reservoir
1
Oil reservoir
‹› Before removing, first loosen filler plug - 2 - to bleed.
‹› To remove, loosen bolt - 7 - on clamp until oil reservoir can be removed from pump block.
‹› Then pull oil reservoir off of pump block, alternating sides.
‹› Always replace O-ring seals.
‹› Before install, first loosen filler plug - 2 - to bleed.
‹› When installing, slide oil reservoir on to the first retainer.
‹› Then slide oil reservoir in the correct position completely onto pump block.
‹› The oil reservoir then engages in the pump block.
‹› O-ring seal must lie cleanly in the intended groove.
‹› After checking, slide on clamp - 6 - and tighten bolt - 7 - to torque.
2
Oil filler screw