TT Coupe L4-2.0L Turbo (BPY) (2008)
Check Seating of Protective Caps
-
Protective cap must no longer be able to be pulled from brake caliper by hand.
-
Press piston lightly against protective cap and lock it into position, e.g. with trim removal wedge - 2 -.
-
Blow protective cap on with pressurized air (max. 3 bar) - 1 -. Protective cap springs on to piston.
Do not angle piston, to avoid damaging the seal sleeve.
-
Press piston into brake caliper using piston resetting tool - 1 -.