audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Front Brakes, 16 Inch FN3|Page 4633 > < Front Brakes, 16 Inch FN3|Page 4631
Page 1
background image

Brake Pad: Service and Repair
Front Brakes, 17 Inch Fnr G57

Front Brake Pads

Special tools, testers and auxiliary items required

‹›  Torque wrench (V.A.G 1331)

‹›  Torque wrench (V.A.G 1410)

‹›  Torque wrench (V.A.G 1332)

‹›  Brake pedal actuator (V.A.G 1869/2)

‹›  Piston resetting tool (T10145)

Removing

‹› When removing, mark brake pads that will be used again. Install in the same position, otherwise braking effect will be uneven!

‹› Observe the direction of rotation when installing brake disc -arrow on brake disc- and installed location -left or right-

-

Raise vehicle.

-

Remove wheels.

-

Using screwdriver, pry off brake pad retaining spring from brake caliper housing and remove.

Loosen bolt - 1 - 4 Nm only to remove brake disc.

-

Disconnect brake pad wear indicator connector - 1 -. 

Front Brakes, 16 Inch FN3|Page 4633 > < Front Brakes, 16 Inch FN3|Page 4631