TT Coupe L4-2.0L Turbo (BPY) (2008)
^
Install adapter T40092/3-2 (left) and T40093/3-3 (right) on supports T40093/3
^
Remove Ground (GND) cable from left long member.
^
Remove left and right connecting bolt for front part of long member.
^
Tighten adapter T40092/3-2 (left) and T40093/3-3 (right) on long members with bolts removed earlier - arrow -.
Note:
^
The illustration shows the left side of the vehicle.
^
Place Square Pipes T40091/1 with Connector T40093/4 in Connector T40091/3 and Supports T40093/3 as shown in the illustration.
^
Slide support T40091/2 into both connectors T40093/4 with slide T40093/5.
CAUTION!
Risk of accident due to loose engine support bridge spindles.