TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-584001.png)
Camshaft Oil Seal: Service and Repair
Sealing Ring for Exhaust Camshaft, Replacing
Special tools, testers and auxiliary items required
^
Seal remover 2085
^
Assembly tool 3066
^
Assembly tool T10071
^
Puller T40001
^
Toothed Belt Tensioner T10020
^
Locking Pin T10060A
Removing
^
Disconnect electrical connector on Mass Air Flow (MAF) Sensor G70 - 3 -.
^
Open clips - 1 and 2 - and remove air guide hose from mass air flow sensor.
^
Remove front air intake connector on lock carrier - 4 - See: Body and Frame/Radiator Support/Service and Repair.
^
Remove engine cover.
CAUTION!
Cover cap of expansion tank with rag and open carefully, as hot steam or hot coolant may escape when opening.
^
Open cap of coolant expansion tank.
^
Remove center noise insulation - fasteners 1 to 4 -.
