TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-422002.png)
-
Release electrical connector - 3 - on Battery Interrupt Igniter N253 using a screwdriver - 4 -.
Installing
Installation is reverse of removal. Observe the following when doing so:
CAUTION:
-
Battery Interrupt Igniters N253 are pyrotechnic components. The same safety measures apply as with airbags. Observe safety
precautions for work on airbags Airbag system, general safety precautions.
-
Before handling airbag units (e.g. disconnecting electrical connector), the person handling it must "electrostatically discharge". This can
be done by touching door striker, for example.
NOTE: Ensure that electrical connections are pushed in as far as stop and engage with a click.
-
Switch on ignition.
CAUTION: Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired
correctly, they may deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the
battery.
-
Connect battery with ignition switched on.
-
Finally, check DTC memory for airbag control module using and process if necessary.
