TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-294016.png)
‹› Note different length of bolts. Bolt - 3 - is approx. 25 mm shorter than bolts - 1 and 2 -.
-
Insert lower bolt - 3 - into engine support.
-
Install engine support from below onto cylinder block and hand-tighten bolt.
-
Lift engine with engine support bridge (10-222A ) so far that both upper bolts - 1 and 2 - can be installed.
-
Tighten all bolts.
-
Lower engine to installation position.
-
Install subframe mount for engine completely.
