TT Coupe L4-2.0L Turbo (BPY) (2008)
-
First tighten nuts - 2 - and then nuts - 5 - to tightening specification.
‹› Ensure that electrical connections are pushed in as far as stop and engage with a click.
‹› Ensure wires are not pinched.
-
Replace airbag securing components after a deployment.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired correctly, they may
deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Switch on ignition.
-
Connect battery ground cable with ignition switched on.
-
If Airbag Malfunction Indicator Lamp (MIL) (K75 ) indicates a fault after installation, DTC memory must be checked, deleted and checked again.
Tightening specifications, refer to => [ Front Knee Airbags Overview ] See: