TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-1704001.png)
Steering Column Cover: Service and Repair
Upper Steering Column Switch Trim, Removing and Installing
Upper Steering Column Switch Trim, Removing And Installing
Removing
-
Position steering wheel so that it is as far rearward and down as possible, using full adjustment range of steering column adjuster.
-
Remove gap cover - 2 - in - direction of arrow A -.
-
Pull upper steering column switch trim - 1 - up - B arrows -.
-
Disengage upper trim at lower steering column switch trim.
Installing
Installation is reverse of removal, but note the following:
-
Next, engage upper trim in lower trim - arrow 1 -.
-
Ensure lower trim pins engage in opening at upper trim retaining tab - arrow 2 -.
NOTE: Shown on removed steering column switch trim in the illustration.
-
Engage gap cover on instrument cluster.
