TT Coupe L4-2.0L Turbo (BPY) (2008)
Steering Wheel: Service and Repair
Steering Wheel with Airbag
Steering Wheel with Airbag
Removing
-
Set the wheels to the straight ahead position.
-
Position steering wheel as far back as possible. Use entire steering column adjustment range to do this.
-
Remove airbag unit.
‹› Removal and installation of steering wheel must take place in center position (wheels in straight-ahead position).
-
Remove bolt - 2 -.
-
Mark position of steering wheel/column with a felt-tip pen.
-
Remove steering wheel - 3 - from steering column.
Installing
Installation is in reverse order of removal, with special attention to the following:
Before positioning steering wheel, make sure wheels are in straight position.
-
When installing removed steering wheel: Make sure that markings on steering column/wheel align.
-
When installing a new steering wheel (without marking): Steering wheel must be position in center position (steering wheel spoke must be
horizontal and wheels in straight-ahead position).
-
Install steering wheel.
-
Install airbag unit.
-
Perform road test.
-
If steering wheel is crooked, remove it again and rotate it on steering column splines.