TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-1789001.png)
Front Subframe: Adjustments
Subframe Mount, Adjusting
Subframe Mount, Adjusting
Special tools, testers and auxiliary items required
^
Engine support bridge 10 - 222 A
^
Spindle 10 - 222 A /11 qty. 2
^
Adapter 10 - 222 A /20 qty. 2
^
Additional hooks 10 - 222 A /2
^
Engine Support Basic Set T40091
^
Engine Support Supplement Set T40093 with T40093/3-2 and T40093/3-3
Proceed as follows:
^
Tightening torques
^
Disconnect electrical connector on Mass Air Flow (MAF) Sensor G70 - 3 -.
^
Open clips - 1 and 2 - and remove air guide hose from mass air flow sensor.
^
Remove front air intake connector on lock carrier - 4 - See: Body and Frame/Radiator Support/Service and Repair.
^
Remove engine cover.
^
Remove EVAP canister with connected lines upward out of bracket - arrow - and lay aside.
^
Remove EVAP canister bracket.
