TT Coupe L4-2.0L Turbo (BPY) (2008)
Trailing Arm: Service and Repair
Front Suspension
Wheel bearing housing, wheel bearing unit, trailing arm with mounting bracket, stone deflector, assembly overview
1. Expanding rivet
2. Stone protection plate
3. Coupling rod
4. Bolt
^
90 Nm plus an additional 1/8 turn (45 degrees)
^
Always replace after removal
5. Trailing link
6. Bolt
^
8 Nm
7. Wheel speed sensor
8. Wheel bearing housing
9. Bonded rubber bushing
10. Nut
^
25 Nm
11. Bonded rubber bushing
12. Dust cap
13. Brake disc
14. Bolt
^
4 Nm
15. Bolt
^
200 Nm plus an additional 1/2 turn (180 degrees)
^
Always replace after removal
^
Before installing, threads in wheel bearing housing should be cleaned with a tap.
^
Wheel hub to stub axle threaded connection, loosening and tightening (same procedure as on all wheel drive vehicles)
16. Wheel bearing unit
^
The ABS sensor ring is installed in wheel bearing unit
^
The wheel bearing unit is maintenance free and has zero play. Adjusting and servicing is not possible!
17. Bolt