TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-1110002.png)
-
Press securing plate - A - upward and remove.
-
Press selector lever cable off of selector shaft lever - arrow - and remove from bracket - D -.
‹› Selector lever cable must not be bent or kinked.
‹› Ignore items - 1 and B -.
-
Remove Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) (G130) => Fuel Injection and Ignition
24 Removal and Installation.
-
Remove exhaust system bracket and tunnel brace - arrows -.
-
Remove heat shield - arrows -.
