TT Coupe L4-2.0L Turbo (BPY) (2008)
Shifter A/T: Testing and Inspection
Selector Mechanism Connectors, Checking
If selector mechanism malfunctions, proceed as follows:
-
Connect Vehicle Diagnosis, Testing, and Information System (VAS 5051B).
-
"Check DTC memory - complete system", if necessary, determine malfunction in "Guided Fault Finding" and correct.
A 10-pin connector for connecting wires from selector mechanism to the transmission (with CAN-Bus lines)
B 4-pin connector to Shift Lock Solenoid (N110) and Selector Lever Park Position Lock Switch (F319)
C 10-pin connector to selector mechanism cover