TT Coupe L4-2.0L Turbo (BPY) (2008)
Transmission Mount: Service and Repair
Transmission Mount
Transmission Mount
Special tools, testers and auxiliary items required
‹› Engine support bridge (10 - 222 A)
‹› Hook (10 - 222 A /10)
‹› Engine Support Basic Set (T40091)
‹› Engine Support Supplement Set (T40093)
Removing
Proceed as follows:
-
Disconnect electrical harness connector - 3 - from Mass Air Flow (MAF) Sensor (G70).
-
Open clips - 1 and 2 - and remove air guide hose from Mass Air Flow (MAF) Sensor (G70).
-
Remove front air intake nozzle from lock carrier - 4 -.
-
Remove engine cover.
-
Position Engine Support Bridge (10 - 222 A) with the following tool components on upper edges of web plate: