TT Coupe L4-2.0L Turbo (BPY) (2008)
/Page-1168002.png)
Pressing on CV Joint
-
Press on carefully.
-
Tighten Press Block (V.A.G 40-204A), driveshaft must not slide in press block, otherwise there may be damage to paint.
-
In case of damage to paint, repair as follows: Remove grease residue using Nitro-Thinner (L 001 600). Apply 2-Component Acrylic Paint (ALN
769 041) with Hardener (ALZ 009 001).
Tightening Clamp
