TT Coupe L4-2.0L Turbo (BPY) (2008)
Wiper Arm: Procedures
Windshield Wipers, Service Position
‹› If windshield wiper motor should run during procedure, hood must be completely closed. Otherwise, voltage supply to wiper motor is interrupted.
-
If there is a chance of freezing, ensure wiper blades are not frozen.
Vehicles without Driver Information System (DIS):
-
Briefly switch ignition on and off again.
-
Activate "one-touch wiping" within 10 seconds.
‹› The windshield wipers run into "service position".
Vehicles with Driver Information System (DIS):
-
Switch on ignition.
-
Press the Reset button - 1 - on the windshield wiper switch until the menu display appears.
-
Select the desired menu item by pressing the wiper switch - 2 - and confirm the respective end position by pressing the Reset button:
‹› The windshield wipers run into "service position".
All Vehicles
CAUTION!
Risk of damaging the hood by running the wipers back in basic position.
‹› Do not drive a vehicle with windshield wiper arms folded up. The windshield wipers automatically go back into basic position above
the speed of 6 km/h.