TT Coupe L4-2.0L Turbo (BWA) (2009)
Seals and Gaskets: Service and Repair
Right Flange Shaft Seal, Replacing
Right Flange Shaft Seal, Replacing
Special tools, testers and auxiliary items required
‹› Thrust piece (3377)
‹› Pulling hook (T20143)
Removing
Proceed as follows:
‹› Shaft seal can be replaced with transmission installed.
‹› Observe general repair notes => [ Repair Instructions ] See: Service and Repair/Procedures/02E Transmission/Repair Instructions.
‹› Observe cleanliness rules when working on transmissions => [ Clean Working Conditions ] See: Service Precautions/02E Transmission/Clean
Working Conditions.
-
Remove right flange shaft => [ Right Flange Shaft ] See: Differential/Differential Output Shaft/Service and Repair/Right Flange Shaft.
-
Remove shaft seal with pulling hook (T20143/2).
Installing
-
Drive in new shaft seal as far as stop using thrust piece (T10049).