TT Coupe L4-2.0L Turbo (CCTA) (2008)
-
Install Adapter For Oil Filling (VAS 6262) - A - in inspection plug opening and tighten by hand.
-
Hold container with Adapter For Oil Filling ( VAS 6262) as high as possible over DSG transmission and let 5.5 liters of gear oil run into
transmission.
-
Start engine and run at idle.
-
Press brake and shift through all selector lever positions " P, R, N, D, S" at idle, retaining each position for at least 3 seconds.
-
Place selector lever in position "P".
-
Gear oil level, checking and topping off => [ Gear Oil Level, Checking and Filling ] See: Gear Oil Level, Checking and Filling.
After replacing gear oil:
-
Connect Vehicle Diagnosis, Testing, and Information System (VAS 5051B) to vehicle.
-
Select transmission guided functions.
-
Perform "Basic Setting" program.