TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Ultrasonic Sensor: Service and Repair
Adaptation (Function 10)
The adaptation function can be used to carry out and store the following adjustment:
-
The ultrasonic sensors can be adjusted to reduce their sensitivity level.
Performing adaptation (function 10)
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -1 - and -0-.
Indicated on display
Rapid data transfer
Q
10 -Adaptation
-
Confirm input with -Q- button.
Indicated on display
Adaptation
Feed in channel number XX
-
Press buttons -0- and -1 -.
Indicated on display
Adaptation
Q
Channel display 10
-
Confirm input with -Q- button.
Indicated on display: the display will show the sensitivity level of the
sensors, e.g. 100%.
Channel 1 Adaptation 100
->
Sensitivity in %
< -1 3- >
NOTE: The max. sensitivity level for the ultrasonic sensors is 100% (factory setting). This can be reduced down as far as 50%.
-
Press -> button.
Indicated on display
Channel 1 Adaptation 100
Enter adaptation value XXXXX
-
Enter sensitivity level e.g. 75 % = 00075
Indicated on display
Channel 1 Adaptation 100
Q
Enter adaptation value 00075
-
Confirm input with -Q- button.
Indicated on display
Channel 1 Adaptation 75
Q