TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
10
-
Screws
-
1.5 Nm
-
Before detaching trim - 1 -, loosen screws so that retainers on guide profile - 13 - disengage from trim.
11
-
Hexagon nut with collar
-
6 Nm
-
Only accessible after removal of wheel housing liner
12
-
Guide profile
-
Trim - 1 - engages in side of guide profile
-
To enable trim - 1 - to engage upon installation, press guide profile upward as far as it will go and tighten screws - 10 -.
13
-
Expanding clip
-
Expanding clips must be pressed into fender before installing trim - 1 - Fig. 1