TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Headliner: Service and Repair
Molded Headliner And Sun Visors, Removing And Installing
1
-
Molded headliner
-
Removing molded headliner
-
Remove upper A-pillar trim
-
Remove A-pillar insulation
-
Remove roof-rail trim
-
Remove upper C-pillar trim
-
Detach connector if interior mirror is of automatic anti-glare type.
-
Remove cover for molded headliner cut-out and reading lamp - 4 -.
-
Disconnect harness connector for anti-theft alarm sensor and hands-free microphone
-
Remove sun visors
-
Remove lighting for make-up mirror - 3 -
-
Remove sun visor holders
-
Unclip molded headliner at the front
-
Unfasten Velcro strip - 2 - on left and right.
-
Take out molded headliner through tailgate.
2
-
Velcro strip (2x)
3
-
Make-up mirror light
4
-
Cover panel for molded headliner cut-out