TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Spoiler: Service and Repair
Spoiler, Installing
Spoiler, Installing
NOTES:
-
Prior to beginning procedure, remove center pin from spoiler and screw in center bolt.
-
Follow correct sequence for tightening nuts when securing spoiler,
-
Place spoiler - 2 - into fixture up against upper locators - 1 -.
-
Slide spoiler - 2 - forward in direction of arrow - a -, keeping in contact with locators at ends of fixture - 1 -.
CAUTION: During procedure, spoiler must be set against locating block.
-
Slide spoiler downward onto lid in direction off arrow - b -.
-
Hold spoiler in position, open hatch and check position of studs through holes
-
Remove spoiler and set aside.
Tightening sequence for nut
-
A second person is required to hold spoiler in correct position, while another screws lock nuts onto outer studs of spoiler, tightening only to hold
spoiler in position.
-
Apply small amount of thread lock compound to middle studs to secure nuts.