TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
/Page-685005.png)
^
Tighten bearing caps 2 and 4 of intake and exhaust camshafts in stages and in diagonal sequence (watch position of dowel sleeves).
^
Install the two bearing caps next to the chain sprockets on the intake and exhaust camshafts.
^
Check correct setting of camshafts:
-
The two markings on the camshafts must be in line with the two arrows on the bearing caps - arrows -.
-
The distance between the two arrows on the bearing caps (or between the colored markings) is 16 rollers on the chain.
-
The notch on the exhaust camshaft is offset slightly toward the inside in relation to chain roller - 1 -.
^
Remove holder for chain tensioner 3366.
