TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Headlamp Control Module: Service and Repair
High Intensity Gas Discharge Lamp Control Modules -J343- And -J344-, Removing And Installing
CAUTION: Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owner's Manual.
WARNING:
-
HIGH VOLTAGE!
-
Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH
VOLTAGE!" symbol.
-
After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.
Removing
-
Remove left or right headlight.
-
Disconnect electrical connection at headlight.
-
Remove bracket -3-. Bracket is secured at vehicle with three nuts -2- (SW10).
-
Remove bolts -4- and remove control module -1- from bracket -3-.
Installing
-
Install in reverse order of removal.