TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Headlamp Alignment Sensor: Service and Repair
Left Rear Level Control Sensor - G76-, Removing and Installing
Left Rear Level Control System Sensor - G76-, Removing And Installing
Removing (front-wheel drive)
Sensor (front-wheel drive) is mounted above the rear axle.
-
Disconnect electrical connection -2-.
-
Remove nut -4- and detach linkage.
-
Remove both bolts -3- and remove control system sensor -1- together with bracket.
-
By removing both socket head bolts (3mm) at level control system sensor -1-, it can be removed from the bracket.
Installing
Install in reverse order of removal.
Removing (all-wheel drive)
Sensor (all-wheel drive) is mounted above the rear axle at the component carrier.
-
Disconnect electrical connection.
-
Remove nut -3- and detach linkage. Linkage is mounted to the crossmember with a bracket and two nuts.
-
Remove both socket head bolts -4- (3mm) at level sensor and remove it from bracket -1-.
-
If necessary, bracket -1- can be removed from component carrier by removing both bolts -2-.
Installing
Install in reverse order of removal.