TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Turn Signal Bulb: Service and Repair
Turn Signal Bulb, Replacing
NOTE:
-
Left or right engine compartment trim must be removed prior to access to rear of headlight housing.
-
Removal and installation procedure is identical for normal (halogen) and High Intensity Gas Discharge (HID) lamps.
Removing
-
Turn bulb holder -9- counter-clockwise and remove from housing -1-.
-
Only unplug electrical connector if bulb holder -9- has to be replaced.
-
Remove bulb -10- from bulb holder -9-.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that
evaporates on the bulb during operation can cause the glass to cloud over.
-
Install new bulb in bulb holder.
-
Install in reverse order of removal.