TT Quattro Coupe L4-1.8L Turbo (AWP) (2001)
Checking voltage supply
-
Connect VAG 1527 B voltage tester as follows:
Connector
Measure against
Contact
1
Body Ground
-
The LED should light up.
Connector
Measure against
Contact
2
Body Ground
-
Switch on ignition.
-
The LED should light up.
If the LED does not light up:
-
Test for open circuit or short to Ground in wiring from contact 1 and/or contact 2 of connector:
-
Correct short circuit or open circuit if necessary.
If the LED lights up:
-
Test activation.
Checking activation
-
Connect test box VAG 1598/31 to wiring harness for engine control module. Do not connect to the engine control module itself. See: Testing and
Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/With Manufacturer's Scan Tool/Scan Tool Connecting and Initial Checks/Wiring
and Component Testing Using VAG1598/31 Test Box
-
Test for open circuit and short to positive or Ground in the following wiring connections:
Connector
Test box VAG1598/31
Contact
Socket
3
55