audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Charge Pressure Control and Vacuum System Connections, Diagram|Page 4539 > < Charge Pressure Control and Vacuum System Connections, Diagram|Page 4537
Page 1
background image

Intercooler: Service Precautions

Charge air system with turbocharger

 

Scan Tool (ST) and test equipment safety precautions

 

WARNING:
^

Due to weight, size and need for manual operation of test instruments while vehicle is driven on public roads, instrument must be used
only with a driver operating the vehicle and an instrument operator operating file test equipment

^

Do not use instrument with driver only. Always use two persons to conduct test

^

Do not place instrument on lap of driver or front seat passenger because emergency stop may dislodge instrument and cause airbag
deployment with risk of injury to instrument operator.

 

WARNING:  Use of Instrument in Audi TT Coupe:
^

Place Instrument in rear seating area and secure by available safety belt.

^

Instrument Operator must be seated in the other rear seating position, after sliding front passenger seat and moving the seat back as far
forward as possible. Do not activate the seat back release lever.

^

Instrument Operator must wear safety belt 

Use of Instrument in Audi TT Roadster:
^

Use only Instrument VAG 1551 Scan Tool (ST). DO NOT USE VAS 5051. Before test, deactivate passenger's airbag using key operated
switch in glove compartment or via OBD program refer to Body-On Board Diagnostic (OBD),  Function 10 (Adaptation).

^

Instrument Operator must be seated on passenger seat with safety belt worn.

^

Place Instrument in foot well in front of passenger seat in a manner allowing the Operator to use the Instrument in a safe manner.

^

After completion of test, re - activate front passenger airbag.

 

Charge Pressure Control and Vacuum System Connections, Diagram|Page 4539 > < Charge Pressure Control and Vacuum System Connections, Diagram|Page 4537