audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Air Recirculation Valve For Turbocharger - N249, Testing|Page 4543 > < Air Recirculation Valve For Turbocharger - N249, Testing
Page 2
background image

Testing internal resistance 
^

Unplug connector from valve.

^

Connect multimeter to valve (resistance measurement range).

^

Specification: 27-30 52

If the specification is not attained:
^

Replace air recirculation valve for turbocharger - N249.

Charge air system with turbocharger
If the specification is attained:
^

Check voltage supply.

Checking voltage supply 

Notes:  The air recirculation valve receives its power supply via the fuel pump relay.

Test requirement 
^

Fuse for air recirculation valve must be OK

^

Unplug connector from valve.

^

Connect voltage tester V.A.G 1527 B as follows:

^

Operate starter briefly.

^

The LED should light up.

If the LED does not light up:
^

Test for open circuit in wiring from contact 1 to fuel pump relay via fuse.
Refer to Electrical Wiring Diagrams, Troubleshooting & Component Locations binder, or equivalent.

^

Repair any open circuits.

Air Recirculation Valve For Turbocharger - N249, Testing|Page 4543 > < Air Recirculation Valve For Turbocharger - N249, Testing